Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Function
a
A
Pump head
d
suction side hose connection
g
strainer
pipe.
Place bottom lattice screen in position with feet down.
B
Model with filter pads: Rinse all filter pads under running water
and insert them into the filter canister according to the drawing:
v
a
6 coarse filter pads blue,
bon filter pad black as a top layer.
The carbon filter pad adsorbs possible dissolved harmful sub-
stances after newly installing the filter. After a working time of
approx. two weeks, the carbon filter pad should be removed.
B
Model with filter media: Rinse all filter media under running water
1
and insert them into the filter canister (drawing):
v
b
1 coarse filter pad blue,
v
d
1 fine filter pad white,
After approx. two weeks, the carbon filter pad should be removed.
Installation
C
Put on the pump head and examine the o-ring for correct fitting.
Close the clips.
D
Place filter underneath aquarium – it must be below water level.
E/F
Fit outlet pipe as per drawing
strainer (drawing A) and attach to side of aquarium with 2 suction
cups and fit hose connections to filter: suction side on bottom in-
take nozzle, pressure side on pump head.
G
Fasten hoses with clamping nut.
Putting into operation
There are 3 ways to prime the filter. 1) With the starter bulb (order
no. 4003540), 2) with the Universal Installation Kit 1 (see H
by sucking the hose on the pressure side.
Connect the pressure side hose to the outlet elbow and the spray
bar while the filter fills with water. The pump can be switched on
when water has filled the filter, and for a short time while trapped
air is exhausted from the filter media a slight noise from the pump
will be heard (this is normal). Fit the plug into the end of the spray
bar after all the air bubbles have disappeared.
Important: When the filter media need cleaning or changing and the fil-
ter is taken away from the aquarium, please note the following points
1)
The filter must have no water in it when reconnecting to the aquar-
ium.
2)
The pressure hose to the spray bar must be drained of water and
the tap (if fitted) left open.
External filter 2215 / 2217
b
filter canister
h
suction cups with clips
v
e
c
pressure side hose connection
e
lattice screen
v
b
1 fine filter pad white and
v
c
EHEIM SUBSTRATpro or SUBSTRAT,
1 carbon filter pad black as a top layer.
1
2
or
. Assemble suction pipe and
f
suction pipe
i
outlet elbow
v
a
EHEIM MECH,
j
outlet
v
c
1 car-
) or 3)
1
Tabla de contenido
