Zyxel ZyWall USG 2000 Guia De Inicio Rapido página 12

Port Interface
P7, P8 ge7, ge8
AUX aux
CONS N/A
OLE
Label
P1~P6
P7~P8
AUX, CONSOLE
The USB ports, extension card slots, and hard disk slot are
reserved for future use.
12
IP Address and
Zone
DHCP Settings
None None, DHCP server
disabled
None None
None None
Type Cable to Use
RJ-45 8-wire Category 5e or above Ethernet cable
RJ-45/ These are dual-personality (combo) Gigabit ports. Each
SFP port consists of an RJ-45 Ethernet connector and SFP
slot pair slot pair.
Use 8-wire Category 5e or above Ethernet cable with
the RJ-45 Ethernet ports.
Use optional SFP (mini-GBIC) transceivers with the
SFP slots. See your local vendor for details.
There are two physical connections, but the ZyWALL
can only use one at a time. If you connect both, the
ZyWALL uses whichever links up first. If an SFP
transceiver and the corresponding Gigabit port connect
at the same time, the ZyWALL uses the SFP
connection.
RS-232 RS-232
Suggested Use With
Default Settings
These RJ-45 and SFP slot
pairs have no default settings.
Configure their IP address
and DHCP settings according
to your requirements. Add
them to the LAN, WAN, or
DMZ zone or create new
zones for them.
Auxiliary modem
Local management