iVistaTablet Digital Ink Pad Manual Del Usuario página 18

Connecting the digital ink pad to your
PC
1
Power on your computer.
Press the power button of your computer to turn it on.
2
Connect the digital ink pad to the computer.
Connect the mini connector of the USB cable into the digital ink
pad, and then connect the other end into the USB socket of the
computer.
3
Tablet Active Area
In order to fit the 4:3 scale common
display, the active area of the tablet is
located at rectangle area which is 15mm
above of the control panel.
4
The digital ink pad is detected by the computer.
You can tell the computer has correctly detected the digital ink
pad by the following signals:
1) The LCD panel of the digital ink pad is displaying icons as
indicated on the right.
2) The icon appears on the system tray of your PC desktop.
Do not connect two or more digital ink pads to your computer at
the same time, as the computer may not be able to distinguish
them.
If the icons on the LCD do not display, please check if the USB
cable is well connected at both ends. Unplug and re-plug the USB
connector if you need to.
In tablet mode, the power of the digital ink pad is provided by the
computer and you can not use the digital ink pad to record your
handwriting.
When using the digital ink pad as a tablet, you are recommended
to operate with a regular tablet pen. Or, you can replace the ink
cartridge of the digital ink pen with a dummy cartridge. Refer to
page 11 for more information.
Active Area
16
167.5 mm
15 mm
control panel