iVistaTablet Digital Ink Pad Manual Del Usuario página 16

Volume Bar
Note that it takes 2 taps to fill a volume bar. So the 5 bars represent 10
increments.
Connection Modes
Transfer data between PC and tablet while recharging
Transfering notes between the tablet and a PC requires the installation
of the My Ink or Free Notes software suite, see the user manual
included with the software for details on use. To begin synchronisation
automatically, connect the supplied USB cable between the tablet and
a PC.
To switch to "data transfer" mode tap Menu/OK > > > .
In "data transfer" mode the battery is recharged and the connection
between the digital ink pad and the host is established.
The Connection Mode is set to be "data transfer" mode by default.
By pressing the editing button on the left of the tablet you can switch
between editing and tablet functions. (see Software Quick Start Guide)
Just recharge battery
You can switch to "recharge only" mode by tapping Menu/OK > >
> and then connect the supplied USB between the tablet and a PC.
The battery charge icon will flash. The digital ink pad can continue to be
used whilst charging.
The Connection Mode will be reset to "data transfer" mode when you
connect the digital ink pad next time.
14