•
This instruction is drawn up for an opening from right to left (see illustration A).
•
For an installation from left to right (see illustration B), use the same instructions, but switch around the
panels: mirror effect.
Install the shower head on the door's side! This will reduce the risk of leaking.
A
•
Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit
your space to install the shower panels.
•
Make sure to have a tile to tile distance (D) between 1143mm (45 in) min. and 1206mm (47 1/2 in) max.
(see image).
SHOWER REVERSIBILITY
WALL TO WALL MEASURES
Make sure to have a distance (D) from the left side tile to the
If D < 1173mm (46 3/16 in) you can cut the support bar to
adequate size. Only cut the side with no holes!
7
B
right side tile:
D Min: 1143mm (45 in)
D Max: 1206mm (47 1/2 in)