Filling With Water - Black and Decker BXSS2200E Manual De Instrucciones

ENGLISH (Original instructions)
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
Š Do not touch metal parts or the body when it is opera-
ting, as it may cause serious burns.
Use and care:
Š Fully unroll the appliance's power cable before each use.
Š Do not use the appliance if the accessories or parts are
not fastened together properly.
Š Use the appliance handle/s, to catch it or move it.
Š Respect the MAX level (Fig. 2)
Š Disconnect the appliance from the mains when not in
use and before undertaking any cleaning task.
Š This appliance is for household use only, not professio-
nal or industrial use.
Š This appliance should be stored out of reach of children
and/or those with reduced physical, sensorial or mental
abilities or who are unfamiliar with its use.
Š Do not store or transport the appliance if it is still hot.
Š To ensure that the iron functions correctly, keep the iron
face smooth and do not hit it against metallic objects (for
example, the ironing board, buttons, zips...)
Š IMPORTANT: Replace the ANTISCALE filter (See
anti-scale warning) whenever the appliance indicates to
do so, use demineralised water with a depleted filter.
Š The use of demineralised water is recommended, espe-
cially if the water in your area contains any type of grit or
is "hard" (contains calcium or magnesium).
Š N.B.: It is normal to hear a pumping sound as the water
is pumped into the steam generator.
Š Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
Š Do not use the appliance on any part of the body of a
person or animal.
Š Do not use the appliance with pets or animals.
Š Turn the thermostat control to the minimum (MIN)
setting. This does not mean that the iron is switched off
permanently.
Service:
Š Make sure that the appliance is serviced only by
specialist personnel, and that only original spare parts
or accessories are used to replace existing parts/acces-
sories.
Š Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
6
Instructions for use
Before use:
Š Remove the appliance's protective film.
Š Prepare the appliance according to the function you wish
to use.

Filling with water:

Š It is essential to have filled the tank with water to be able
to work with steam.
Š Remove the tank from the appliance by pressing the
tank release button (D) located at the base of the tank or
fill the tank through the filling hole (A).
Š Fill the tank taking care to observe the MAX level (Fig.2).
Š Replace the tank in its housing, ensuring that it is well
fitted.
Use:
Š Uncoil the cable completely and lift the handle before
plugging it in.
Š IMPORTANT: Check that the water tank is coupled
correctly to the anti-scale filter on the inside before
switching on the appliance (Fig. 1)
Š Fill the deposit taking care to observe the MAX level
(Fig. 2)
Š Connect the appliance to the mains.
Š Switch the appliance on (On/off) (L) , setting the
temperature and steam control (E) to the position that
corresponds to the desired temperature. (Fig.3)
Š The indicator lamp (B) will light up (Fig.4)
Š During the heating process, and depending on the
setting, the ECO or MAX indicator will flash until the
steamer reaches temperature, once this happens the
indicator will remain constant, indicating that it is fully
ready to iron. This process takes about 60" and is
controlled by the product's electronics.
Š Do not use temperatures higher than those indicated on
the garments to be treated.
● Temperature for synthetic fibres (Polyester,
Nylon...).
●● Temperature for silk, wool. (Minimum temperature
for ironing with steam)
●●● Temperature for cotton.
Max Temperature for linen.
Š If garment has various kinds of fibres, select the tempe-
rature for the fibre that requires the lowest temperature.
(For example, select the temperature for polyester for an
article made out of 60% polyester and 40% cotton).
Š Wait until the pilot light (B) has gone out which will
indicate that the appliance has reached an adequate