Trust ALMDT-2000 Manual De Instrucciones página 8

ALMDT-2000 INFRARED MOTION SENSOR
EN
7. Detection angle
De horizontal detection angle of the sensor is max. ~120° and the vertical detection angle is max ~62°.
Within these angles movements will be detected by the sensor.
Note: After a motion has been detected by the sensor it needs about 6-8 sec to initialize before a
new motion can be detected.
8. Unpairing ALMDT
Consult the manual of the Siren to activate the learn mode. Send (while the learn mode of the Siren is
active) a disconnect-signal by pressing the DEL button with a sharp object on the back of the ALMDT.
The LED indicator will flash 5x to confirm that the unpairing has been done successfully.
Note: When the sensor is not used unpair it from the Siren first before removing it.
9. Delete ALMDT memory
To delete the memory of the ALMDT press the DEL button for 2 seconds with a sharp object (untill the
LED starts to blink). Release the button and press the DEL button again for 4 seconds. (untill the LED
starts to blink fast). Press the DEL button shortly to delete the memory of the ALMDT. The LED will
blink 5x to confirm the memory has been deleted.
2