Despliegue; Árbol De Menús; Tabs; Character Scrollbar - Stanley Tau Manual Del Usuario

2.4.2 Despliegue

A dropdown [1] arrow appears to the right of menu items with multiple choices.
To view choices, highlight the menu item using the up/down arrows then use the
toggle button to expand the dropdown. Use up/down arrows to scroll and the
toggle button to select/accept.
2.4.3 Árbol de menús
Un árbol de menús [1] aparece junto a los elementos del menú relacionados.

2.4.4 Tabs

2.4.5 Character Scrollbar

This scrollbar enables adding: 0-9 and a period. The up arrow [1] and down arrow
[3] direct scrolling with the active character [2] displayed between. Use the
controller's up/down arrows to scroll through character choices. The left arrow
backspaces. The right arrow moves one position to the right to input next character.
Push toggle button to accept entry.

2.4.6 Pantalla de funcionamiento

The display background color is white in normal operation. After an OK fastening cycle, the
display background color will change to green for two seconds, then revert back to white for the
next cycle. After a NOK fastening cycle, the display background color will change to red for two
seconds, then revert back to white for the next cycle. The display background color will turn red in
the event of a fault; see section 2.5.
Shutoff Codes on the display indicate why a tightening cycle shutoffs other than upon completion
of tool strategy.
Shutoff Code
TIEMPO El tiempo de apriete excede el valor del tiempo programado
PARO Eje parado ya sea por el operador u otro dispositivo
125% Par de torsión ajustado sobre el límite del par de torsión para el eje
FALLA Precede a una falla descrita en 2.3
PÉRDIDA Eje en estado de entrada en pérdida
CANCELACIÓN Puede ocurrir durante un ciclo de apriete cuando una actualización del
microprograma del eje está en curso
10
Tabs [1] appear at the top when multiple menu selections exist.
To navigate between tabs, use the left/right arrows. The active
tab is white; inactive tabs are grey.
Icons [1] identify controller events (see list
below). Displays last torque reading and
units [2] when a tool is connected, selected
job and shutoff codes [3]. The run screen
displays unless other programming
functions are in use.
Descripción
User Manual