Idiomas disponibles
Idiomas disponibles
CP 88105
3. Before beginning, disconnect power by removing fuse or
turning off circuit breaker.
4. Once fan installation is completed make sure that all
connections are secure to prevent fan from falling.
5. Fan must be turned off and stopped before reversing fan
direction.
6. Check that the means of fitting the fan to the ceiling is
capable of supporting the weight of the fan when in
operation. (Minimum 50Kg.).
UNPACKING YOUR FAN
1. Unpack fan and check the contents. Do not discard the carton. If warranty replacement or repair is
necessary, the fan should be returned in original packaging. Remove all parts and hardware. Do not
lay motor housing on its side; the decorative casing may shift.
2. Examine all parts. You should have the following:
1. Mounting bracket.
2. Downrod/Ball assembly.
3. Ceiling canopy.
4. Fan housing and motor
5. Set of blades
6. Remote controller
7. Parts pack.
8. Lamp shelder
10
