Recommended Grounding Method; Electrical Requirements - Sears Kenmore 580.72066 Manual Del Propietário

OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVETREPOWERSUPPLYCORD
GROUND PRONG.
ELECTRICAL GROUND IS REQUIRED ON
THIS APPLIANCE.
A 115-volt 60 Hz, AC only, 15A fused and
properly grounded electrical supply is required•
A time delay fuse or time delay circuit breaker
is recommended. Use a dedicated circuit,
serving only this appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED GROUNDING METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply cord with a 3-prong grounding plug. To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code (ANSI/NFPA 70)
latest edition and all local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by a
qualified electrician.
_WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Faiture to follow these instructions can result
in death, fire, or electrical shock.
_3-prong
^ , _- _ grounding
,J-prong -_<.._--_
- 13 I,,---- ,
• type wall
groundln_ _w re " I
plug _ (_._ _ ceplace
Ground
Power _ prong
supply
cord
You can choose between the two methods below according to your preference and window sill shape.
USING SLIT "A" USING SLIT "B"
Fasten the stopper using Type A screw, and lead the Fasten the stopper using left screw hole, and rotate
power cord out through slit "A". properly to lead the power cord out through slit "B".
Screw (Type A)
Powercerd
Screw (Type A
Power cord
D
-4-