ARIETE DigiMix professional 1569/1 Manual De Instrucciones página 10

EN
FITTING AND REMOVING TOOLS
- The appliance has two types of whisk attachment for use as required by the type of mix:
- pair of traditional metal whisks (D) for whisking mayonnaise, sauces, cream and egg whites;
- pair of kneaders (E) for mixing doughs.
- To fit the whisks, take the appliance by the handgrip (M) and insert the shaft of each whisk into the
relevant hole, until it clicks into place.
The whisks in the pair are not identical and therefore, the one with the plastic gear mechanism
needs to be fitted into the hole on the left (Fig. 2).
- To remove the whisks, first detach the power body from the support (N), then press the relevant
release button (G) and pull it outwards to remove (Fig. 3).
IMPORTANT:
The whisk attachments need to be fitted to the power body before the body can be fitted onto
the support (N).
Never press the release button (G) while the appliance is operating.
INSTRUCTIONS FOR USE
- Before use, clean the bowl (A), the kneaders (E) and standard whisk attachments (D) using a cloth
and hot soapy water (mild detergent). Wipe the support (N) and power body (F) clean with a damp
cloth.
- Place the support (N) on a flat, steady surface.
- Press the arm tilt button (B) and at the same time, lift the arm on the support (N) upwards (Fig. 4).
- Place the bowl (C) in the special space, inserting it perfectly over the pin in the base (N) of the
support (Fig. 5).
- Fit the power body (F) complete with whisk attachments on the arm of the support (N), starting
from the front, so that the hook on the support inserts into the bottom slot on the power body (F)
(Fig. 6). Make sure that the whisks are correctly inserted inside their housing in the support (N)
and in particular, that the plastic gear on the left whisk fits perfectly onto the other gear inside the
housing on the arm.
- Press the attach button (A) and at the same time, lower the power body (F) until it is locked onto
the support (N) (Fig. 7). Release the button (A).
- Pour the ingredients into the bowl (C) and pressing the arm tilt button (B) lower the arm of the
support (N) using the handgrip (M) on the power body (Fig. 8).
- Plug the power cord into a mains power source.
- Switch on the appliance by pressing the On/Off button (H); set the required speed using the selec-
tor (L). The appliance has 16 different speeds.
NOTE: Start mixing at the slowest speed, gradually increasing to the required level. For kneading,
we recommend using the higher speed settings.
- To add more ingredients to the mix or to change the type of whisk attachment, it is necessary to
switch off the appliance, using the relevant button (H) and unplug it before lifting the power body
as described previously.
- After use, switch off the appliance and unplug the power cord from the power mains.
- Lift the arm of the support (N), pressing the arm tilt button (B) and remove the power body, com-
- 8 -