Stills; Sleep Timer - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

Possible combinations of source with PIP source
= source can be combined with PIP source
- = source cannot be combined with PIP source
Source
Tuner SCART1 SCART2
Tuner - -
SCART1 - -
SCART2 - -
CVBS - -
YC - -
YUV - -
VGA - -
HDMI1
HDMI2
If no signal is present at the chosen PIP source, the PIP function is ended after
i
approximately 30 seconds.

Stills

You can watch stills from the current programme.
► Press the FREEZE button on the remote control, the current picture is frozen.
► Press the FREEZE button again to cancel the freeze function.
If the picture-in-picture function has been set, both pictures are frozen.
► In the OSD menu you can also switch the still function on and off under the Display - Stillmenu
option.

Sleep timer

After expiry of the preset time the Sleep Timer switches the LCD TV into standby mode.
► Press the i-button on the remote control until the desired time until switch-off has been set.
The following times can be chosen: 30, 60, 90, 120, 150, 180 minutes and off.
A26361-K1139-Z120-1-M119, Edition 1
MYRICA VQ32-1 / MYRICA VQ40-2
PIP Source
CVBS YC
- - -
- - -
- - -
- - -
- - -
- - -
- - -
YUV VGA HDMI1
- -
- -
- -
- -
- -
- -
- -
-
-
English - 29
HDMI2
-
-