Connecting To The Vga Input; Vga Settings (Rgb) - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

MYRICA VQ32-1 / MYRICA VQ40-2

Connecting to the VGA Input

VGA settings (RGB)

Setting
Auto. Calibration
H Total
V Pos.
V size
H Pos.
H size
Phase
► Press the red button to close the menu.
48 - English
Use the VGA input to connect a device with a
VGA port.
►
►
Or
►
►
►
►
Description
► Press the button to start auto calibration.
The function now tries to find the optimum picture settings for the
incoming signal. The picture moves back and forward while the setting is
being found.
Here you can correct the scanning frequency for the VGA picture. This
function is intended only for expert users.
► Set with the or button the vertical picture position.
► Set with the or button the vertical picture size.
► Set with the or button the horizontal picture position.
► Set with the or button the horizontal picture size.
Remove flicker and distortions.
Press the SOURCE button or F4 to open
the <Inputs> selection menu.
With the or button choose the input
input and press the red button (M).
Choose the VGA input with the PC button.
Press the MENU button to open the Main
Menu.
With the or button choose the
Setupmenu and press the
Choose Inputs with the or button and
press the button.
A26361-K1139-Z120-1-M119, Edition 1
button.