Important Basic Rules About Using The Set - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 187
MYRICA VQ32-1 / MYRICA VQ40-2
Never place any containers which are filled with liquid (e.g. vases) on the device. The device is
not waterproof! Protect the device from splashing water (rain, sea water).
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help
desk.
The device must be disposed of in accordance with the local regulations for disposal of special
waste. During handling and disposal, the safety regulations applicable to fluorescent materials
must be observed.
The screen background lighting contains mercury. You must observe the applicable handling
and disposal safety regulations for fluorescent tubes.
Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
Only use the screen resolution settings and refresh rates specified in the "Technical data"
chapter. Otherwise you may damage your flat panel. If you are in any doubt, contact your sales
outlet or our help desk.
Use a screen saver with moving images and activate the monitor's power management to
prevent still images from "burning in".
Keep this operating manual together with your device. If you pass on the device to third parties,
you should include this manual.

Important basic rules about using the set

The LCD TV you have bought meets the highest quality demands in this segment and was examined
for pixel faults. Despite the great care we take when manufacturing the sets, the fact that some
pixels are dead cannot be totally excluded.
We ask you to appreciate that these effects cannot be considered as an operating defect in terms of
the warranty, provided they are within the limits set by the standard.
If still pictures are displayed for an extended period, this can cause shadows on the screen,
something that can happen with every TV set. This type of LCD panel phenomenon can be limited by
observing the following points:
do not allow a still picture to be displayed for an extended period
use your flat panel in a full-screen format (16:9)
activate the screen saver
as far as possible, display moving pictures
always switch off the screen when it is not being used
reduce the contrast and brightness as far as possible.
Poor conditions can cause your LCD TV to hum. The humming generally comes from the mains
voltage supply and can be caused by connecting different protective earth conductors. You can solve
the problem by installing a so-called sheathed current filter between the incoming antenna lead and
the antenna input on the TV. The sheathed current filter is like a small adapter and can be found at
your local electrical shop.
If your LCD TV is connected to an external antenna, it must be earthed to protect it against power
surges and static charges. The earth must comply with the valid regulations.
4 - English
A26361-K1139-Z120-1-M119, Edition 1
Tabla de contenido
loading

Este manual también es adecuado para:

Myrica vq40-2

Tabla de contenido