Managing The Files In Built-In Memory Or Memory Card From Pc - AIPTEK V10 Manual De Instrucciones

Managing the files in built-in memory or
memory card from PC
Please follow the procedures below to manage files in either built-in memory or
memory card.
1. Make sure the projector is powered off if the battery is installed.
2. Connect one end of the bundled USB cable to the USB port of the projector and the
other end to a powered PC.
3. Turn on the projector:
Press and hold down the Power button for 4 seconds till you hear music.
4. A removable disk will appear in your computer.
PC can only recognize one storage medium each time (check memory card
first, then built-in memory if no memory cards is inserted).
Do not switch the storage medium during operation.
When connecting the projector to PC USB port without turning on the
projector, the PC starts charging the battery inside the projector. To read the
files in the memory, press the Power button or remove the battery first.
1 1