Replacing The Filters; Protecting The Environment - Black and Decker ORB48 Traducción De Las Instrucciones Originales

Replacing the filters

The filters should be replaced every 6 to 9 months and
whenever worn or damaged.
Replacement filters are available from your Black &
Decker dealer: Filter part number VFORB10-XJ

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
(Original instructions)
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker office
at the address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com
Battery (Fig. G)
Z
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in accord-
ance with local regulations.
Discharge the battery by operating the appliance until
u
the motor stops.
Using a screwdriver, carefully remove the decorative
u
facia (13) by inserting it into the recess (14) and lifting.
Remove the four screws (15) holding the body of the
u
appliance together.
Lift the housing cover away from the assembly.
u
Lift out the battery pack / motor assembly.
u
Detach all lead connections from the battery pack /
u
motor assembly.
Remove battery pack / motor assembly.
u
Place the battery pack in a suitable package to ensure
u
that the terminals can not be short-circuited.
Take the battery to your service agent or to a local
u
recycling station.
Once removed, the battery can not be refitted.
ENGLISH
9