Door Conversion - THOMSON THFZ 190 Manual Del Usuario

DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local
authorised service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is
recommended to use a crosshead screwdriver and a spanner (both not supplied).
1. Remove the top cover by removing the screw covers and then screws from the top cover.
2. Remove the ornament cover of the top cover and install it on opposite side. Set top cover aside.
3. Remove the screws that hold the upper hinge to the frame. Remove the upper hinge.
4. Remove the levelling feet and screws that hold the lower hinges and remove the lower hinges.
5. Lift freezer door off the lower hinge and set aside.
6. Remove the screw from the plate at the bottom of the freezer door and tighten the screw to the
bottom plate on opposite side.
7. Transfer and install the lower hinges on opposite side with screws. Transfer and install the lower hinge
pin on the opposite hole of the lower hinge.
8. Fit the levelling feet by fastening them.
10
10