Indicator And Operating Elements; Commissioning - Rothenberger RODIA DRY CLEANER 1200 Instrucciones De Uso

3.2

Indicator and operating elements

Select from the following functions and settings:
0
Vacuum cleaner is switched
off
I
Vacuum cleaner is running
A
Ready mode for ON/OFF
automatic mode
R Filter cleaning function
RA Ready mode for ON/OFF
automatic mode
Automatic shaker function
Fill level indicator
3.3

Commissioning

Switching on and off Electric tools:
The plug socket on the vacuum cleaner will always be live when the mains plug is plugged in, ir-
respectively of the position of the switch.
Electric tools and compressed air tools must be switched off when they are connected!
Note: If the switch is in the >0< position, the plug socket on the vacuum cleaner can be use as
an extension lead. Connection value: Vacuum cleaner + connected unit,maximum 16 A.
 Insert the plug into socket
>0< Vacuum cleaner is switched off
>I< Vacuum cleaner switched on without shaker function
>A< Vacuum cleaner on standby The vacuum cleaner only switches on when the tool is
switched on. After the tool is switched off, the vacuum cleaner runs on for approx. 10
sec to prevent any residue from collecting in the hose.
>R< Filter cleaning function
>RA< Ready mode like >A< plus automatic filter cleaning
 Set the vacuum cleaner to the switch position >0<
 Pull out the plug after you have finished
 Fix the suction hose in the accessory storage location on the back of the container for stor-
age.
 The ends of the hose can be pushed into each other to prevent particles of dirt from coming
out.
Switching on and off vacuum cleaner:
 Push the plug of the vacuum cleaner into the plug socket.
 Set the desired operating mode on the switch. The vacuum cleaner is ready for suction.
 After vacuum cleaning, set the switch to „O". The vacuum cleaner is switched off.
 Pull the mains plug of the vacuum cleaner out of the plug socket.
 Secure the mains cable.
 Remove the electric/compressed air tool.
18
All manuals and user guides at all-guides.com
Plug socket current-conducting
Plug socket current-conducting,
Automatic shaker function off
Plug socket curren-conducting,
The vacuum cleaner is switched on and off via the con-
nected electrical/compressed air tool at the plug socket
In this switch setting the vibrator is activated for approx.
10 sec. and then switches off again automatically
Ready mode like "A" plus automatic filter cleaning
Filter cleaning is performed (switch setting RA) automati-
cally during the next working break when the minimum
volume flow level is reached
When the container is full and/or there is a blockage in the
suction hose, the full indicator lights up
ENGLISH