Hkoenig homy90 Manual De Instrucciones página 18

Trouble shooting
problems
the machine doesn't
work after power on
and press start button
lights on, the
machine doesn't work
machine stops during
working process
no response when
pressing buttons
pasta easily break
pasta adhere
flour leftovers too
much in the stir cup
Sound and light
alarm
reasons
1.power cord not installed
properly
2.self protection for motor long
time working
3. stir cup, stir cup lid not properly
installed
1.not pressing buttons
2.machine self breakdowns
1.material ratio not right, overload
making stuck and stops working
2.other objects in the flour,
overload making stuck and
machine stops
3.motor temperature control
protection
1. power off interval too short,
system not reset
2.the machine is under procedure 2.normal case
3. machine self breakdowns
1. not using plain, strong protein
flour
2. water and flour ratio not
proper, less water
water and flour ratio not proper,
more water
1.low voltage
2.module hole blocked
3.material matching mistake
the machine blocked
solutions
1. install power cord properly
2. reuse after cooling for 20—
30 minutes
3. stir cup, stir cup lid properly
installed
1. select function and press
button
2.repair at local service site
follow strictly as "volume ratio "
to add material, add water if
too dry, stir to pasta,
select[extrude pasta]; if too wet
add flour to stir, select[extrude
pasta].
2. power off to clean
3.reuse after 20-30 minutes
stop
1. reuse after power off 3
minutes
2. repair at local service site
1. choosing plain or strong
protein flour
2.add flour and water as cup
mark
add water, flour as cup mark
1.using household voltage
stabilizer
2.clean module holes
3. follow strictly "ratio chart" to
add material
1.check and clean cups