FOREVER KIDSWATCH KW-500 Manual Del Usuario página 8

26006 – PLAY
EN
26002 – T-MOBILE
the remaining code digits are available on manual/forever.eu or www.mcc-mnc.com/
After sending the message, wait several minutes for KidsWatch to download the settings from
the network. Data transfer arrows will appear.
- Please send a text message to the number of the watch with the content: pw,123456,ts#, in
response, the watch will send us the parameters of the watch. An example:
ver:G36WS_YDE_V1.1_2019.12.19_09.45.40;
ID: 1234567890;
imei:123456789012345;
ip_url:52.28.132.157;
port:8001;
upload:600S;
bat level:96;
language:1;
zone:8.00;
ec:0;
NET:OK(73);
Check the data received in the SMS with the watch number.
- If the number ID/IMEI/REG CODE is different from the badge on the watch or the bottom of
the package, set a new IMEI number.
Please send a text message to the number of the watch with the content: pw,123456,i-
mei,xxxxxxxxxxxxxxx# where X are the numbers from the badge - the watch, after receiving
the SMS with the code, sends back in the SMS response with the correct IMEI number, for
example: pw,123456,imei,359614514986574#
- If the IP_URL and PORT is different than in the example above, send an SMS from the phone to the
number of the SIM card installed in the watch with the text: pw,123456,ip,52.28.132.157,8001#
- the watch will send a text message back: [surl,52.28132.157,port,8001#]ok.!
- the content GPRS/NET should include „OK". I fis „NO" the watch is not connected to the inter-
net. Please follow point 9.1. The value in parentheses shows the signal strength.
ATTENTION:
spaces. This is very important because if the characters are not used correctly, the
commands will be misinterpreted by the watch and will remain unanswered.
Could not call watch. The signal is busy or the subscriber does not answer
Reason:
The watch does not recognize the incoming number or the app is set to do „not disturb".
Solution:
- Check if the number you are calling from is hidden number.
- Check if there are contact numbers in the application.
The watch only receives calls from numbers previously set in the contacts of the application.
The watch does not show the current time and date
Reason:
The watch did not connect to the application server to update the time.
Solution:
8
When writing text messages, pay attention to punctuation marks and