Installation; Requirements To Be Used; Important - Apach ASM32F 2S 3PH Instrucciones Originales

INSTALLATION

REQUIREMENTS TO BE USED

The environmental conditions of the place where the machine is installed
must have the following characteristics:
 be dry
 heat sources that are adequately distant
 adequate ventilation and lighting complying with the hygiene and
safety standards required by current laws.
 The support surface must be horizontal, must not be placed in the
immediate vicinity of the machine obstacles of any kind that may
affect the normal ventilation of the same.

IMPORTANT

In compliance with current laws, the electrical network must be equipped with an automatic
differential switch with characteristics appropriate to those of the machine in which the
opening distance of the contacts is at least 3 mm; indispensable, moreover, an efficient
grounding system.
Check that the supply voltage and the frequency of the system are compatible with the values shown both
in the technical features and on the plate on the back of the machine.
INSTALLATION
IMPORTANT
All installation and maintenance operations must be carried out by qualified personnel
authorized by the manufacturer, who declines all responsibility deriving from incorrect
installation or tampering.
The machine is supplied on pallets in a closed package with cardboard. To lift the machine, you need a
forklift or a transpallet. If the machine is lifted with the aid of ropes or belts, pass them under the pallet.
To remove the machine from the packaging, you can use straps positioned under the machine and hooked
to a forklift truck (FIG.3).
NOTE
All the details relating to the packaging must be disposed of according to the regulations in
force.
After removing the machine from the packaging proceed as follows:
 Place the machine in the intended location.
 Remove the protective film, where present, avoiding the use of tools that can damage the
surfaces.
 If the machine has the wheels mounted, make sure that they are locked with the brake, pushing
the lever "A" downwards until it stops (FIG.4).
 If the machine is unstable put under the feet or wheels pieces of hard rubber.
18