Position/Stroke Table - Hilti NPR 032 PE-A22 Manual De Instrucciones Original

5.5.3

Position/stroke table

Pos. Stroke Application
1 40 mm 12.0 mm ... 66.7 mm
(1.6 in) (0.47 in ... 2.63 in)
(with NPR PS M & NPR PR M)
16.0 mm ... 75.0 mm
(0.63 in ... 2.95 in)
(with NPR PS G & NPR PR G)
12.0 mm ... 108.0 mm
(0.47 in ... 4.25 in)
(with NPR PS V & NPR PR V)
12.0 mm ... 63.0 mm
(0.47 in ... 2.48 in)
(with NPR PS TH & NPR PR TH)
12.0 mm ... 110.0 mm
(0.47 in ... 4.33 in)
(with NPR PS U & NPR PR U)
1⁄2 ... 4 in
(with NPR PS PP & NPR PR PP)
1⁄2 ... 2 in
(with NPR PS MP & NPR PR MP)
2 80 mm 76.1 mm ... 108.0 mm
(3.1 in) (3.00 in ... 4.25 in)
(with NPR PR M)
3 100 mm Industrial application
(3.9 in)
5.6 Fitting the crimping / pressing jaws
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing jaws.
Never operate the crimping / pressing tool without crimping / pressing jaws in place.
To ensure correct crimping and reliable and safe operation, use only the crimping jaws approved by
the system provider and/or machine manufacturer.
1. Remove the battery and select the most suitable crimping / pressing jaws.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
4. Pull out the locking pins.
5. Fit the crimping / pressing jaws.
6. Push the locking pins in until they engage.
7. Rotate the crimping / pressing head to the desired working position.
The crimping / pressing head can be rotated much more easily when not under pressure.
5.7 Removing the crimping / pressing jaws
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing jaws.
1. Remove the battery and rotate the crimping / pressing head into the outset position.
8 English
3
4
2215658
*2215658*