TEFAL AVANTI ELITE Instrucciones De Uso página 8

3365- AVANTI SPEED2-M1
For U.K. only
Wiring instructions
Green
E
Brown
and
or red
yellow
or green
Fit 13 amp
fuse
Blue or
Use cable
black
gripper
N
Connect the Green/Yellow wire to the terminal in the plug marked "E" (or by the earth
symbol) or coloured Green or coloured Green and Yellow.
Connect the Brown wire to the terminal in the plug marked "L" or coloured Red.
Connect the Blue wire to the terminal in the plug marked "N" or coloured Black.
A 13 amp fuse should be fitted when the appliance is connected to a BS 1363 plug.
Seek professional advice if you are unsure of the correct procedure for the above.
About your factory fitted plug (supplied with certain models only)
The lead is already fitted with a plug incorporating a 13 amp fuse. If the plug does not fit
your socket outlet, see next paragraph.
Should you need to replace the fuse in the plug supplied, a 13 amp approved BS 1362
fuse must be used. (refer to wiring instructions for use rating)
If the plug supplied does not fit your socket outlet, it should be removed from the mains
lead and disposed of safely. The flexible cord insulation should be stripped back as
appropriate and a suitable alternative plug fitted. The replacement plug must be equipped
with a 13 amp fuse.
Important: If the electrical cord of this appliance is damaged, it must only be replaced by
an authorised Service Dealer. The safety of this appliance complies with the technical
regulations and standards in force.
The fuse cover is an important part of the plug. Please ensure that it is always refitted.
If you lose this cover please do not use the plug. You may contact TEFAL UK limited
for a replacement.
For help and advice please call our Customer Relations team on:
0845 602 1454 – UK
(01) 4751947 – Ireland
or consult our web-site: www.tefal.co.uk
4
17/07/03 11:40
This appliance must be earthed
L
Important: the wires in this lead are coloured in accordance with the
following codes:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Page 4