Hudora 37330-37 Instrucciones De Montaje página 4

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise
in the future. Please always include these instructions when handing on the product to a
third party. This product must be assembled by an adult. This product is designed for
private/domestic use only. This product is not designed for commercial/industrial use.
The use of the product requires certain capabilities and skills. Always adjust according to
the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: Children's Inline Skates
Item numbers:
37340, 37342
Sizes 30-33, 64 x 22 mm, ABEC 5
Class B: Inline-skates intended for use by a user mass of more than 20 kg
up to 60 kg and a length of the foot of no more than 260 mm.
37341, 37343
Sizes 34-37, 64 x 22 mm, ABEC 5
Class B: Inline-skates intended for use by a user mass of more than 20 kg
up to 60 kg and a length of the foot of no more than 260 mm.
37333, 37733
Sizes 30-33, 64 x 24 mm, ABEC 3
Class B: Inline-skates intended for use by a user mass of more than 20 kg
up to 60 kg and a length of the foot of no more than 260 mm.
37337, 37737
Sizes 34-37, 64 x 24 mm, ABEC 3
Class B: Inline-skates intended for use by a user mass of more than 20 kg
up to 60 kg and a length of the foot of no more than 260 mm.
Purpose: Inline skates for recreational sports.
If you have trouble getting the product ready for use or need additional product informa-
tion, please visit our website http://www.hudora.de, where you will find answers to all of
your questions.
CONTENTS
1 Pair of adjustable inline skates
These instructions
Other items included are meant to facilitate safe transportation and are not required for
the installation and use of the product.
SAFETY INSTRUCTIONS
WARNING! Always use complete safety gear, since like many comparable sports, inline
skating is a sport with relatively high risk of injury. Always wear a hand and wrist guard,
knee and elbow pads and reflecting clothes and a helmet while skating. However, please
remember that wearing complete safety gear cannot guarantee 100% protection.
HUDORA also provides protectors, helmets and reflecting products. For more information,
visit our website http://www.hudora.de/.
Use the skates only on suitable surfaces that are smooth, clean, dry and as free from
traffic as possible. Always give due consideration to other traffic and remember that there
are restrictions for inline skaters in the Road Traffic Ordinance. Do not make any changes
in the inline skates that may compromise safety. The self-locking effect of self-securing
nuts and axles can reduce due to frequent loosening and tightening of the connecting
links. Remove sharp edges resulting from usage immediately. Regular inspections, main-
tenance, and servicing increase the safety and life of your skates. Before you begin, al-
ways check that all connecting links and locking pieces are properly fastened and wheth-
er the stopper still has enough material and has not worn out!
SKATING TECHNIQUE
Every beginning is difficult and the most accidents take place for the 'beginners' within
the first ten minutes. Be very careful during this phase! Take a few steps with toes point-
ing forwards because this how you will push off from the ground. Balance on one foot.
Better skills at doing this will make skating and braking easier later. Be careful – inline
skates can reach unexpected speeds. Now practise on clean, level tarmac. Stand straight
on your skates with your feet parallel and about six inches apart. Slowly raise your arms
forward and bend your knees till your shin is in contact with the boot. Let your body
weight pass through the balls of your feet. Beginners often mistakenly stand straight,
All images are examples of the design.
keeping knees too stiff and putting their weight on the heels. Avoid all streets that are
steep, have traffic on them or have difficult surfaces. Select the difficulty of the roads and
surfaces according to your level of expertise. Moisture, sand and dirt damage the wheels
and bearings. The next step to learn is turning. Get comfortable with the feel of the edge
by tilting the skates outwards and inwards while you are still standing. Use your hip and
knees to do this. Now try to do this while you are skating. You will experience a greater
pressure on the inside of your foot while turning, which is why you must always lean a
little inwards.
BRAKING TECHNIQUE
Learn how to brake. If you want to stand you can just roll to a halt. Pros also do that. You
can of course brake with stoppers as well: lift your right foot's toes slightly so that the
stopper touches the ground at the back. The more pressure you put, the quicker you will
decrease the speed. Avoid full brakes because then you may not have complete con-
trol. Always skate with foresight!
CHANGING ROLLERS AND BEARINGS (PICTURE 1)
1. Chassis | 2. Roller | 3. Aluminum Spacer | 4. Ball Bearing | 5. Aluminum Washer |
6. Axle Winding | 7. Axle Screw
Wheels and bearings are available as accessories and can be changed independent of
each other if they wear out or get damaged. While changing the wheels, keep in mind that
bearing needs to be removed from the old wheels and attached to the new ones. Refer to
Illustration 1 for better understanding and remember to properly fasten the axle screw
and secure with locking varnish. Your inline skates have precision bearings that have
been filled with lubricant under high pressure at the production plant. This is why your
skates move easily and quickly with just a little pressure while skating. Like the wheels,
the bearings also need to be replaced when they stop working properly. However, never
dismantle them!
HOW TO ADJUST THE SIZE (PICTURE 2)
If you have trouble making size adjustments, we recommend you ask an experienced in-
dividual. To adjust the size, simply press down the button at the bottom end of the heel.
While pressing down the button, you can now slide the fixed back end of the shoe back
and forth with your other hand. Below the center part of the shoe you will see the shoe
sizes you can adjust the shoe to. Once you have adjusted the shoe to the desired size,
simply let the button go and pull the back of the shoe one more time. You will now hear
the button lock into place.
EXCHANGING OR ADJUSTING THE HEEL BRAKE
Frequent braking or complete braking wear out the stoppers. If the stopper has lowered
from its position, it needs to be replaced. Loosen the stopper from the stopper holder with
the key and remove it. Position the new stopper carefully and retighten the Allen screw.
The free space between the lower edge of the stopper and the skating surface must be
between 7-17 mm. As far as possible, let an experienced person replace the stopper.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do
not make any structural changes. For your own safety, please use original spare parts
only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or
corners should develop, the product may not be used any more. If in any doubt, please
contact our service team (http://www.hudora.de/service). Store the product in a safe place
where it is protected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
provided in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as
much effort into rectifying them. You can find numerous information on the product, re-
placement parts, solutions to problems and lost assembly manuals at http://www.hudora.
de/service/.
4/8