ELECTRICAL SAFETY
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric
shock, and injury to persons or pro p e rt y. Read all instructions before using any appliance.
• DANGER: Do not bend or manipulate the power cord. Do not use power plug for ON/OFF operation.
• Do not let hot water touch bare skin. Keep combustible materials such as furniture, bedding, pillows,
clothes, and/or papers away from the back of the unit.
• Do not operate this, or any other appliance with a damaged cord. No other appliance should be plugged
into the same outlet. Be sure that the plug is fully inserted into the receptacle.
• Do not run cord under/over carpeting or other heat insulators. Do not cover the cord. Keep cord away
from traffic areas, and do not submerge in water.
• We do not recommend the use of an extension cord as it may overheat and cause a risk of fire. If you
must use an extension cord, use No. 14 AWG minimum size and rated not less than 1875 watts.
• Unplug the water dispenser before cleaning or making repairs. In order to avoid potential electric shock,
do not clean the machine with water - instead use a soft damp cloth.
• Do not plug your water dispenser into the power outlet or turn the power switches on, when the water
dispenser is empty.
• Exercise caution and use reasonable supervision when the appliance is use by or near children.
• Do not use your water dispenser outdoors. Place the water dispenser away from direct sunlight and make
sure that there is at least 6"/15cm of space between the back of your unit and the wall. Keep a minimum
distance of 2"/5cm on each side of your unit free. Do not move the unit roughly. Do not let unit incline
over 45°.
• Do not use this product to dispense anything other than water.
• Do not flick the power switches quickly on and off. The resulting power surges may damage your water
dispenser.
• Always turn your water dispenser off when there is no water left in the bottle or when you are changing
bottles. Turn it back on after the new bottle has been placed and the air is purged from the dispensing
buttons.
• W A R N I N G : This appliance must be grounded. Do not alter 3-prong plug.
• I M P O R T A N T: The wires inside the unit are colored in accordance with the following code -
G reen or green with a yellow stripe: Grounding wire
White: Neutral wire
Black: Live wire
• To avoid any instability of the appliance, it must be placed on an even or flat surface. If the supply
c o rd is damaged, it must be replaced by the manufacturer or its service agent or a qualified
electrician to avoid any hazard s .
• This water dispenser must be positioned so that the plug is accessible.
• Disconnect the power supply when not in use.
• When the unit is not in use for an extended period of time, disconnect the power cord and drain
water out of the unit using the drain plug.
• Do not expose the unit to frost. In case the unit is exposed to frost, leave it in an atmosphere at
room temperature for 24 hours (around 20°C) before plugging it in to avoid damaging the electrical
c o n t rols.
E N G L I S H
- 2 -