LEGRAND In one 882 03 Manual Del Usuario página 8

Personalize the lighting level of buttons + and - (outside learning)
The lighting level of the ON button cannot be modified.
On button + :
- set the lighting level using the ON, OFF buttons by a long press
- validate by simultaneous pressing on the + and ON buttons for 5 secs (after switching off, the load comes on
again at the set level)
- the level of button + is then saved.
On button - :
- set the lighting level using the ON, OFF buttons by a long press
- validate by simultaneous pressing on the - and OFF buttons for 5 secs (after switching off, the load comes
on again at the set level)
- the level of button - is then saved.
Notes :
This operation can be performed with the rockers mounted.
Notes :
This "In One by Legrand" product can be linked to radio products by means of the PLC/RF modular interface
(Cat. No. 036 06).
To save a lighting level during the learning, step 2 of "Learning the scenario" becomes :
Press LEARN
15
Press the ON control
button which is to be
linked to the transmitter
16
Press the ON or OFF
control button (long press)
to set the required lighting
level