Temperature Display; Speed Setting; Basic Settings; Alarm - Auriol 4-LD4146 Indicaciones Sobre Su Utilización Y Su Seguridad

Temperature display

Press SET to select the temperature unit Celsius (°C) or Fahrenheit (°F).

Speed setting

Press and hold buttons when setting numerical values to use the speed setting feature.

Basic settings

The following settings are adjustable: Language of the day of the week, 12/24-hour time format,
date, time and time zone.
Press and hold SET for 3 seconds in normal time display mode. The language of the day of the week
will blink on the display. Set the language by pressing UP or DOWN. The following languages are
selectable: GE=German, EN=English, IT=Italian, FR=French, DU=Dutch, SP=Spanish,
HU=Hungarian, SL=Slovenian. Press SET to confirm your setting. Set the12/24-hour time format, the
year, the date format (M=month, D=date), the month, the day, the hours, the minutes and the time
zone adjustment in the same way. Use the time zone adjustment to adjust the time if you are not in
your home time zone. Set the difference in hours of your current time zone to your home time zone.
Restart radio time signal reception after setting the time zone adjustment.

Alarm

The alarm has 2 separate adjustable alarm times. Use Alarm 1 (1-5) for Monday to Friday. Use
Alarm 2 (6-7) for Saturday and Sunday.
Press and hold ALARM to enter alarm time setting mode. The hour display for alarm 1 (1-5) will blink
on the display. Press UP or DOWN to set the hour and confirm your setting by pressing ALARM. Set
the minutes for alarm 1 and the hours and minutes for alarm 2 (6-7) in the same way.
Press UP in normal time display mode to activate or deactivate alarm 1 (1-5).
Press DOWN in normal time display mode to activate or deactivate alarm 2 (6-7).
The bell symbol will appear if the alarm is activated.

Snooze

Press SNOOZE/LIGHT on the top of the case to use the snooze feature. The light activates briefly, z z
and the bell symbol blink on the display. The alarm sound will stop for about 8 minutes and then
restart.

Cleaning instructions

Clean the alarm clock with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.

Declaration of Conformity

If used as intended this product conforms to the basic standards of § 3 and the other relevant
provisions of the FTEG (Section 3 of the R&TTE directive). The declaration of conformity may be
requested here: [email protected]

Disposal of the electronic appliance

This alarm clock may not be disposed of with normal household waste. Dispose of the
alarm clock at an approved disposal facility or at your local recycling centre. Please
observe the current rules and regulations when disposing of the appliance. Contact the disposal
system if in doubt.

Disposal of the batteries

Please dispose of your batteries properly in containers especially set up at retailers.
Batteries do not belong in household waste. Dispose of the batteries at an approved
disposal facility or at your local recycling centre. Contact the disposal system if in doubt.

digi-tech gmbh warranty

This alarm clock includes a 3 year warranty starting on the day of purchase. In case of defects of this
alarm clock you have, by law, certain rights regarding the vendor of the alarm clock. These rights
are not changed by the warranty which is described in the following paragraphs.

Warranty conditions

The warranty duration starts on the date of purchase. Please keep the original receipt in a safe place.
The receipt is needed as a proof of purchase. If a defect occurs in the alarm clock within 3 years, the
alarm clock will be repaired or replaced (according to our choice) free of charge. This warranty
requires that, within the 3 year warranty period, the alarm clock and the receipt can be made
available to us along with a short written description of the defect and when it occured. If the defect
is covered by the warranty, you will receive the repaired alarm clock or a new alarm clock. Repair
or replacement does not cause the warranty period to restart.
- 10 -