Problem
Possible reason
The dirt cup is
1. There is a dirt
difficult to
build-up in the
remove/replace.
appliance.
2. An obstruction in
the dirt path has
jammed the dirt
cup door open.
3. The handle is not
in the correct
position.
The rotating
1. The handle is not
brush will not
locked in the
turn off.
sweep position.
Protecting the environment
Should you find one day that your appliance needs
replacement, or if it is of no further use to you,
think of the protection of the environment. Black &
Decker repair agents will accept old Black &
Decker products and ensure that they are disposed
of in an environmentally safe way
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Possible solution
1. Remove the dirt cup
and clean it and the
inside of the
appliance with a
damp cloth.
2. Check for excessive
material in the
bottom of the
sweeper. Follow the
Voltage
instructions given in
No-load current
the section
Battery size
"Unclogging the
Weight
appliance".
3. Change to the
sweep mode.
1. Press the handle
into the appliance
until it is securely
fitted.
Batteries
At the end of their useful life, discard batteries
with due care for our environment. Remove the
batteries as described above.
Place the batteries in suitable packaging to ensure that the
terminals cannot be short-circuited.
Take the batteries to a local recycling station.
Technical data
Vdc 6
A 1.2
Type LR06 (AA)
kg 1.5
EC declaration of conformity
SC100
Black & Decker declares that this product conforms to:
89/336/EEC, EN 55014, EN 60335
Spennymoor, County Durham DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your statutory
rights. The guarantee is valid within the territories of the
Member States of the European Union and the European
Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black & Decker
guarantees to replace defective parts, repair products
subjected to fair wear and tear or replace such products to
ensure minimum inconvenience to the customer unless:
The product has been used for trade, professional or hire
purposes.
The product has been subjected to misuse or neglect.
The product has sustained damage through foreign objects,
substances or accidents.
Repairs have been attempted by persons other than
authorised repair agents or Black & Decker service staff.
ENGLISH
SC100
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
31-01-2006
9