BH FITNESS G-639 Manual De Instrucciones página 14

previous step to the top of the side
bars, as shown in Fig.6, and connect
the control cable terminal (L), coming
out of the monitor, to the control cable
(LL), sticking up from the right-hand
side bar (11-1). Then
connected terminal into hole (V) at the
top of side bar (11-1), Fig.6A, and
insert screws (2C), making sure not to
pinch the cables, and screw in until
hand tight.
Note:
Make sure that the cables do not
become caught up when the unit is
folded. Tighten the 4 screws (2C) fully.
Next, fit the handrail covers (4-7);(7-
slide the 1;4-1) as indicated in Fig.7, and
secure the covers using screws (17).
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTIC.
14