Tabla de contenido
Idiomas disponibles
Idiomas disponibles
will last 1 minute.
Press ENTER or START and the
machine will start to operate after 3
seconds, shown by the countdown on
the central Program Profile display
(A).
EMERGENCY STOP.-
For the user's maximum safety, this
unit is equipped with a safety key (37)
and a STOP / RESET button.
The safety key (37) must be slotted
into its housing (E), Fig. 2, otherwise
the machine will not start.
When you are using the machine
always clip the cord on the safety key
to your clothing. Tugging on the cord
will pull the safety key out of its slot
and the machine will stop immediately.
To restart the machine simply put the
key back into the key slot.
Remove the safety key (37) whenever
the machine is not being used and
keep it out of children's reach.
Pressing
the
STOP/RESET will also stop the unit
immediately. To restart it, press the
button marked START again.
ELEVATION.-
The
inclination
independently of all other functions.
Each time the main switch (L) is set to
position "I", as described in the
"STARTING" section of the manual.
The display will show the inclination
level that you finished off on during
your last session.
To lower the inclination to zero with
the unit stopped, press and hold the
STOP key for 5 seconds.
If inclination is not at zero when the
START
key
exercising, the machine will zero itself
while it is starting.
red
button
marked
function
operates
is
used
to
You can adjust the elevation level by
pressing
[INCLINE▼] keys to specify a value
of 0 to 15, depending on how you
would like to do the exercise.
Important.
inclination level of your treadmill by
propping it up on objects.
IMPORTANT:
LEVEL MUST BE AT ITS LOWEST
SETTING
TO PUT THE TREADMILL INTO THE
FOLDED POSITION.
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unit is
equipped. The pulse rate readout will
appear after a few seconds. The heart
symbol beside the pulse rate value will
flash in time with your heart rate, Fig.3
- 4.
IMPORTANT.
MEDICAL
THEREFORE THE HEART RATE
SHOWN
GUIDELINE PURPOSES.
FITTING THE ELECTRONIC
UNIT.-
ATTACHING THE MONITOR:
Fig.5, first of all insert the handrail into
the monitor tube in the direction of the
arrow, make sure that the holes on the
handrail are lined up correctly.
Now insert the handrail into the
monitor tube in the direction of the
arrow, make sure that the holes on the
handrail are lined up correctly, taking
care not to pinch cables for the
begin
monitor (1).
Next, bring the monitor assembly
which you have just put together in the
13
the
[INCLINE▲]
Do
not
change
THE
INCLINATION
BEFORE
ATTEMPTING
THIS
IS
APPLIANCE
IS
MERELY
or
the
NOT
A
AND
FOR
Tabla de contenido
