Description Of Your Appliance; Door Reversibility - Brandt BFD7610SW Manual De Uso

EN 1 / INSTALLATION

DESCRIPTION OF YOUR APPLIANCE

(depending on the model)
E
E
A A
C
C
Thermostat
A
Door shelves
B
C Vegetable compartment
Bottle shelf
D
Freezer
E
D
D
compartment

Door reversibility

You can alter the direction in which the doors open if you wish:
The appliance must always be disconnected from the power
supply when changing the direction the doors open.
• Tilt the appliance slightly backwards and wedge it in this position.
• Unscrew the pin from the lower hinge and then remove the door
from the refrigerator section.
• Take off the lower hinge by removing the 4 screws.
Fit it on the opposite side.
• Unscrew the middle hinge and remove the freezer door.
• Remove the upper hinge and fit it on the opposite side
• Swap over the hole covers and the plastic hinge pin guides on
the top of both doors.
B
B
• Fit and hold the freezer door on its hinge pin, insert the middle
hinge into the lower part of the door and screw it in place.
• Insert the refrigerator door between the middle hinge and the
bot-tom hinge and then close it.
• Refit the lower hinge and screw it firmly in place.
• If your appliance is fitted with a vertical handle, remember to
move it to the opposite side.
31