3.1.2 Module management
3.1.2.1
Create module
Gas Discharge Tube (GDT)
To correct an entry, the user can go back via the [ESC] key.
32
With this menu option the user can store new product numbers and/or
delete stored numbers. Information on new modules can be found at
www.weidmueller.com.
In the top right of the display area the registered module number is
indicated by "xxx". Here the user types the new product number and
confirms this by pressing [OK]. The product number is to find on the front
side of the module, see figure 3.
Figure 3
Module front side view
In the next step the value of the GDT is to be stored in the V-Test. The
range is between 0 and 830.
If an out-of-range value is entered, the user is asked to retry.
product number
1171340000/04/08.16