Intended Use; Technical Data - Bifinett KH 1102 Instrucciones Para El Manejo Y La Seguridad

1,7 l Electric water kettle
Bifinett KH 1102

1. Intended Use

This electric water kettle is meant to heat
water for household use.
It is not meant to be used with any other
fluids and for commercial or industrial use.
To avoid life-threatening electric shocks:
• Make sure that the base
connections never comes in contact with
water.
First let the base
in case it gets wet accidentally.
• Make sure that the power cord never
becomes wet or damp during operation.
Lay the cord such that it cannot be pin-
ched or otherwise damaged. Should the
power cord be damaged, get it replaced
by the customer service, before the kettle
is used again.
• Always pull the plug out of the power
socket after use. Switching off the device
is not sufficient because the device recei-
ves power as long as the power plug is
connected to the socket.
and also pass it on with the device to any future owners.
Important for your safety!
with electrical
dry completely,
Keep this manual for future reference –

2. Technical Data

Voltage ..................................: 230 V / 50 Hz
Power consumption .......................: 2200 W
To prevent fire hazards and the risk of
injury:
• Always heat water with a closed lid ,
otherwise the automatic cut-out mecha-
nism doesn't work. Boiling water can
then spray out over the edge.
• When in use, the electric water kettle is
very hot and hot vapours may escape
from it. It is always best to wear oven
mitts when handling the kettle.
• Make sure that the electric water kettle
is kept in a stable and vertical position
before you switch it on. Boiling water
can cause an unstabile kettle to fall over.
• Never leave the electric water kettle
unattended.
• Do not let children and other frail persons
handle the appliance unsupervised, as
they may not always be able to assess
potential risks..
7