Miniland DIGIMONITOR 3.5 TOUCH Manual De Instrucciones página 29

To disable this feature and see the area monitored
continuously, turn off the VOX mode on the monitor.
· VOX mode OFF: The camera transmits continuously,
allowing you to monitor your baby or the area you
wish to monitor continuously.
· VOX mode ON: The camera only transmits when it
detects a sound with sufficient intensity, according to
the level selected, around the camera.
Sound sensitivity
Some babies are noisier than others! You can
customize the sensitivity of your baby monitor to suit
your baby. Set "high" sensitivity for a baby that sleeps
peacefully and cries quietly and "low" sensitivity if the
baby tends to make noise while sleeping or makes
fairly loud noises before actually crying, or set it to
a "medium" level if you consider that your baby's
behavior does not fit either of the two previous
patterns.
To activate this function, first of all make sure you
have set the Standby mode to 1,3 or 5 minutes (see
point 5.2.6.6.1.). Choose 1,3 or 5 if you want your
camera to stop transmitting the image after 1,3 or 5
minutes if there is no sound around.
Then, click on the icon
the icon VOX and select the desired camera
between the ones already connected to the monitor.
You can then enable or disable the feature and
choose the sensitivity level of the camera; i.e. the
sound threshold above which the camera will start
transmitting. To reactivate the image, just press any
key.
You can also control this feature from the main
screen. Click on the icon (f) and it will appear with the
sensitivity level (LO, ME, HI) or with a cross to disable
the VOX feature. Changes made directly on the home
screen only affect the camera that is picking up the
images shown.
Note 1: If the device is in VOX mode and you do
not wish to wait 1, 3 or 5 minutes for the screen to
turn itself off, press the power button (6) to turn it on
immediately.
Note 2: To turn on the screen press any button.
5.2.6.7. VOLUME/DISPLAY (Figure 9
With this menu you can set the main features of the
screen: brightness and volume.
To access, click on the icon
and the icons for each of these features will appear.
You can select one of the avaliable levels for
brightness (1-5) and volume (0-5) by pressing the +
or – signs as required.
5.2.6.8. SETTINGS (Figure 15
With this menu you can access and set many of the
features of the baby monitor. To access it, click on the
icon in the main menu (I).
In this menu there are several distinct submenus,
the monitor settings and the settings of each of the
cameras linked to the monitor.
5.2.6.8.1. MONITOR SETTINGS (Figure 16)
To choose this option, click on the icon
in the main menu (I), touch
)
in the main menu (I)
)
.
- Pair (Figure 17)
This product is designed to allow observation of
different areas with up to 4 cameras (channel 1, 2, 3
or 4 assigned to different cameras). The monitor and
the original camera leave the factory programmed
with channel 1. If you need to add an extra camera,
follow the following process.
After entering the Pair submenu, select the channel
in which you want to link the new camera by clicking
the relevant icon. Keep in mind that the cameras
that are showed in green have already been paired
to the monitor, the ones that haven't, have a grey
background.
The icon will then change
(1) of the monitor will flash green. Press the link
button (VI) of the camera and, if the process has been
carried out successfully, the icon will appear in green
in place of the previous one and the LED indicators
will light up green.
If linking is not successful, the icon
In this case, try again with the same channel or with
another channel if necessary.
For various reasons, connection may be lost between
the monitor and a camera already linked. In this case,
repeat the process explained above to relink the
camera to the monitor.
· Date/Time (Figure 18)
Access to this submenu allows you to set the date and
time appearing on the baby monitor.
· Alarms (Figure 19-20-21)
This submenu allows you to configure up to 4 different
alarms: feeding
and sleeping . To set them, click on the icon of the
alarm you want to activate and set the time when you
wish that it warns you.
1. Feeding alarm
the icon (s) appears on the main screen. While the
alarm sounds, the (s) icon will flash. You can press
it to choose whether to repeat the alarm for the next
day or disable it.
2. Diaper alarm
the icon (t) appears on the main screen. While the
alarm sounds, the (t) icon will flash. You can press
it to choose whether to repeat the alarm for the next
day or disable it.
3. Medicine alarm
the time when you want the alarm to warn you for the
first time. For example, if you set the Start Time to
9:00 a.m. and the alarm to ring every 4 hours (a total
of 6 times), the first alarm will ring at 9:00 a.m, the
second at 1 p.m, the third at 5 p.m and the last at 9
p.m. When this alarm is activated, the icon (u) will be
displayed on the main screen.
4. Sleeping alarm
the icon (v) appears on the main screen. While the
alarm sounds, the (v) icon will flash. You can press
it to choose whether to repeat the alarm for the next
day or disable it.
You can access this submenu from the main screen
by pressing the (q) icon.
· Auto Switch Time (Figure 22)
This baby monitor offers the possibility of the monitor
29
ENGLISH
and the ON/link LED
, diaper changing , medicine
: When this alarm is activated,
: When this alarm is activated,
: In this alarm, you must first set
. When this alarm is activated,
will appear.