Fermax MDS CITY Manual Del Funcionamiento página 24

Telephone - Telephone
Allows to communicate two telephones in the installation. The steps to follow
are:
1. Dial the number of the first telephone.
2. Press Po
3. Press the
4. Dial the number of the second telephone.
5. Press the " " key in order to generate a call to that telephone.
Communication between both telephone is held and the display will show
the telephones communicated.
Door lock releasing
When communicated with an outdoor panel, press this key to open the
corresponding door. The LED located besides the key will flash shortly, indicating
the door release action.
RESET Key
The RESET key is located below the door release button (
key will set all the telephones and outdoor panels in stand-by.
Note:
For condominiums, if the panel communicate to is set as general entrance, the
sequence to dial is: "1N", being 'N' the panel number (from 0 to 9). '1' Indicates
that the panel acts as a general entrance, and it will be displayed like that.
Example: If the general entrance number 3 was selected, the display would
how [ 13/Po].
If the panel is configured as a block panel, the panel number to dial will be
preceeded by the block number (from 00 to 99). The display will show a sequence
like "BBNN", being 'BB' the block number and 'NN' the panel number.
In this case the guard unit of the general entrance cant't stablish audio
communication with outdoor pannels , even though it is possible to open the
door.
Pag 24
to set communication with it.
key. The seconds telephone number will be requested.
). Pressing this