Chicco 06626 Manual De Instrucciones página 32

tensity and steady to reassure the
baby while he sleeps, and a nightlight
with high intensity, variable light to
accompany him while he falls asleep.
Nightlight On/Off in Minimum in-
tensity, fixed and variable intensity
modes
Press the nightlight On/Off button
(2) and the nightlight will switch on at
minimum intensity and steady.
If during this operating mode, you
press the nightlight On/Off button (3)
once, the Variable brightness night-
light mode will be activated.
Brightness will automatically vary
from maximum level to minimum
level.
At the twelfth minute, nightlight
brightness will remain fixed at mini-
mum level.
- 0-4 minutes ➟ maximum-medium
high intensity
- 4-8 minutes ➟ medium-high-medi- medium-high-medi-
um-low intensity
- 8-12 minutes ➟ medium-low-mini- medium-low-mini-
mum intensity
- over 12 minutes ➟ nightlight at mini- nightlight at mini-
mum intensity and steady
During the Variable brightness night-
light operating mode, if the nightlight
On/Off button (3) is pressed once,
light brightness will return steady at
minimum level.
If the nightlight On/Off button (3) is
pressed again in this operating mode,
the brightness variation cycle will
begin again, starting from maximum
level. Press the nightlight On/Off but-
ton (3) button again for 2 seconds and
the nightlight will switch off, both in
minimum, steady brightness and in
Variable brightness nightlight mode.
For energy savings, when the Baby
unit (primarily in transmitter mode of
images and sounds) is being powered
via Alkaline batteries, the nightlight,
if in minimum intensity and steady
mode, switches off automatically 5
minutes after the end of the Variable
brightness nightlight operating mode
cycle.
If the Baby unit (primarily in transmit-
ter mode of images and sounds) is
being powered via mains adapter (1),
the nightlight will remain on in both
modes until the button (3) is pressed
again for 2 seconds.
The nightlight can be switched on
even when the Baby unit is off.
Luminous operating status indicators
• The power and link indicator light (9)
supplies 3 different pieces of informa-
tion:
- Indication that the device is on and
properly connected to parent unit:
the indicator light (9) will light up
steady green.
- Indication of loss or absence of link
with the parent unit:
the indicator light (9) will light up
green and begin to flash.
As soon as the link with the parent
unit is restored, the indicator light (9)
will light up steady green.
NOTE: when the Baby unit switches
on, it searches for the channel to link
with the parent unit; therefore the in-
dicator light (9) will flash green until a
link is established.
-Indication of device off:
the indicator light (9) will switch off.
• The Alkaline battery status indicator
light (12) supplies 2 different pieces of
information:
32