Offsound Control (Deactivation And Activation Of The Sounds) - AEG IEB64000XB Manual De Instrucciones

flashes. Touch .
seconds.
To deactivate the function: the hob must
be deactivated. Touch
flashes. Touch
seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch
comes on for all zones. Set the heat setting
in 4 seconds. You can operate the hob.
When you deactivate the appliance the
function operates again.
5.9 OffSound Control (Deactivation
and activation of the sounds)
Deactivate the hob. Touch
Touch for 3 seconds.
Touch of the timer to choose one of the
following:
• - the sounds are off
• - the sounds are on.
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
5.10 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
comes on for 4
for 4 seconds until
. comes on for 4
for 4 seconds until
for 3 seconds.
or comes on.
you can hear
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
Automat‐
ic light
Mode H0 Off
Mode H1 On
Mode On
3)
H2
Mode H3 On
Mode H4 On
Mode H5 On
Mode H6 On
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds until you hear a
beep.
3. Touch for 3 seconds until
comes on.
4. Touch until H and a digit (0 - 6) comes
on. H5 is the default setting.
5. Touch of the Timer to select the
desired mode (H0 - H6). The chosen
mode activates automatically after 10
seconds.
Boiling 1) Frying 2)
Off Off
Off Off
Fan speed Fan speed
1 1
Off Fan speed
1
Fan speed Fan speed
1 1
Fan speed Fan speed
1 2
Fan speed Fan speed
2 3
or
ENGLISH 49