Monti BLASTER Manual Del Usuario página 5

®
BRISTLE BLASTER ELECTRIC DOUBLE
3. General Safety Instructions
For your own protection and for the protection of your electrical tool, pay attention
to all parts of the text that are marked with this symbol!
WARNING -
WARNING -
warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference. Ensure that these
documents are kept with the electrical tool at all times.
4. Special Safety Instructions
4.1 Safety Warnings Common for the use of Rotary Impact Tool Operations:
a) This power tool is intended to function as a Rotary Impact Tool. Read all safety
warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow instructions may result in electric shock, fire and/or serious injury.
b) Only Rotary Impact Surface Preparation / Bristle Blasting operations shall be
performed with this power tool.
designed may create a hazard and cause personal injury.
c. Only use MontiPower
this tool. Do not use accessories which are not specifically designed and
recommended by the tool manufacturer.
attached to your power tool does not assure safe operation.
d) Do not use a damaged Bristle Blaster
e) After replacement of the Bristle Blaster
assembly.
f) After fitting accessories such as the Adapter System and Bristle Blaster
remove Allen key / Torx wrench. Always ensure the Allen key / Torx wrench is
removed prior to switching on the tool.
g) When placing the tool on a bench or on the floor, the label must always point
upward.
h) When not in use, disconnect the tool from the power supply and store in a suitable,
dry place to prevent unintentional or unauthorised use.
i) Always hold the tool by the body and the vertical handle when in operation.
j) Use Bristle Blaster
k) The Bristle Blaster
l) If the tool suddenly feels different (level of vibration) or produces a different noise
(pitch), the tool should be shut down immediately and the accessories such as the
Adapter System, Bristle Blaster
m) Wear personal protective equipment. Always use a face shield,
safety goggles or safety glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of stopping small abrasive or
workpiece fragments.
generated by operations. The dust mask or respirator must be capable of filtering
particles generated by your operation. Prolonged exposure to high intensity noise
Reading the operating instructions will reduce the risk of injury.
Read all safety warnings and instructions. Failure to follow all safety
®
Bristle Blaster
®
Belt in the correct operating direction (Figure 3).
®
Belt can produce sparks when machining hard surfaces.
The eye protection must be capable of stopping flying debris
Operations for which the power tool was not
®
Belts and MontiPower
Just because the accessory can be
®
Belt or Adaptor System, inspect before use.
®
Belt, check Adapter System for correct
®
Belt checked for damage.
®
Adaptor Systems with
®
Belt, always
EN
5