Functions; Indirect Measuring (Pythagoras) - Stanley FatMax Tru Laser Measurement TLM300 Manual De Empleo

D

Functions

GB
F
Addition/Subtraction
I
To add or subtract two or more measurements simply
works as follows:
E
Measurement +/- Measurement +/- Measure-
ment +/- .... = RESULT
P
Pressing the EQUAL - key {A, 8} ends the sequence
and displays the result in the main line; the actual
NL
measurements are scrolled upwards in the display.
Pushing the CLEAR - key {A, 11} undoes the most
DK
recent operation.
S
Areas and volumes can be added/subtracted in
exactly the same manner.
N
Area
FIN
Press the AREA - key {A, 3} for the area function. The
corresponding symbol appears in the display. When
J
both measurements have been taken the result will be
CN
automatically calculated and displayed in the main line.
If you want to measure another area, press AREA -
ROK
key {A, 3} once more.
PL
Volume
HR Press the VOLUME - key {A, 4} for the volume func-
tion. The corresponding symbol appears in the display.
H
When 3 measurements have been taken the result
will be automatically calculated and displayed in the
RUS
main line.
CZ
Functions
GR
If you want to measure another volume press
VOLUME - key {A, 4} once more.

Indirect Measuring (Pythagoras)

The device can calculate distances using Pythagoras'
theorem. This method is useful when the distance to
be measured is difficult or dangerous to access.
• Make sure you strictly follow the sequence of the
measurements
• All target points need to be vertically or horizon-
tally in the same plane
• Best results can be expected if the device is
turned around a fixed point (e.g. positioning
bracket folded out completely and the device is
held towards a wall)
• It is possible to use the "Minimum/maximum
measuring" by pressing the ON/MEASURING -
key {A, 1} longer. The minimum value is used for
the measurements perpendicular towards the
target respectively the maximum value for the
other measurements.
Indirect Measuring - Determination with two
points
See figure {I}
Press the PYTHAGORAS - key {A, 13} until the
correct symbol appears on the display. The distance
to be measured will flash in the display. Take the
necessary measurements.
6
Stanley TLM 300 1.0.0 gb