Q u i c k
Programming Bar Codes
Following are some frequently used programming bar codes.
Note:
For additional host types, refer to the LS4008i Series
Product Reference Guide,
p/n 72-53911-xx, available on the LS4008i Series CD.
Set Defaults
Scanning this bar code sets all parameters to their default values
Host Type
If you are using a Synapse cable (i.e., part number STIxx-xxxx),
the scanner autodetects the type of host you are using, so you do
not need to scan bar codes.
If you are using a USB interface, the scanner autodetects the USB
and defaults to the HID keyboard interface. See below to select
the IBM Hand-Held host type. Refer to the LS 4008i Product
Reference Guide, p/n 72-53911-xx, for additional USB host types.
If you are using Keyboard Wedge, RS-232, Wand Emulation, or
IBM 46XX, you must select that host type from the following bar
codes:
Keyboard Wedge Host Type
R e f e r e n c e
SET DEFAULTS
IBM PC/AT & IBM PC Compatibles
37
.