Elko EP iNels AirWD-101 Manual De Instrucciones página 6

Device states
Unit initialization
Start
Search for BTS * 2)
SIM ERR *2)
ERR *2)
Successful network connection * 2)
Measurement
Tamper
Magnet
SET button short press (> 2s)
SET button longer press (> 2s / <5s)
Communication
Communication
Other known states
Does not respond to the SET button
The unit is still in reset
The unit does not respond even after
removal insert the battery
When the tamper is pressed, the LED is turned off !
Note:
R... LED red
G... LED green
Indication
3 x R + G blinks
2 x fl ashes R (2xR _ 2xR _ ...)
5 x fl ashes R (repeatedly)
1 x fl ashes R
without indication
3 x fl ashes G
1 x fl ashes G
2 x fl ashes G
1 x fl ashes R
any LED lights
still indicates start
without indication
AirWD-101S
power supply (external or battery), reset unit
x
error MAC / error MODULU / error SIM
non contact / contact magnet
setting mode (signaling of measurement / pulses)
it is necessary to disconnect the power supply (external or battery), after 60 seconds after the LED goes out, insert the battery
the battery may be discharged
a discharged battery or a damaged product
* 1) Indicates only when you press SET> 2 s (setting mode)
* 2) Planned
3 / 3
AirWD-101L
Search availability BTS
SIM Error - cannot be loaded (SIM
card insertion and rotation check) / or
start unit ok
opening the cover
test, cancel, „long press"
sending / receiving data
AirWD-101NB
Connection to the network
NB-IoT MODULE error