Deleting Data; Service And Warranty Information - Tru-Test EziWeigh6 Guia De Inicio Rapido

Using the indicator interface
Press to view the menu items. The top level of menus includes:
Statistics View statistics for the current session, or for
previously recorded sessions.
Clear last record Delete the last record in the current session.
Sessions Start a new session, view statistics for the current
session or for previously recorded sessions, delete a
session or delete all sessions.
Setups Change indicator settings and enable extra features.
Press to go deeper into a sub-menu or to select an option.
Press or to scroll through a list of options.
Press to escape out of a sub-menu back to the next tier up.
Use the alpha numeric keypad to enter text or numbers.
Press to toggle between alphabet characters and numbers.
Press to type a decimal point or full-stop.
With alphabet characters set, press
to type a hyphen (-).
With alphabet characters set, press
Caring for the indicator
Do not leave the indicator or load bars in water. Store the indicator in a
cool, dry place.
By default, the indicator turns itself off after 15 minutes of inactivity, in
order to conserve the battery.
Wipe the indicator using a damp cloth, warm water and soap. Other
cleaners may damage the case.
Do not leave the indicator where it may be exposed to extreme
temperatures (e.g. on the dashboard of a vehicle).
Fit the dust caps when there are no cables connected to the indicator.
This will prevent moisture and dirt from entering the connectors.

Service and warranty information

For service and warranty information, see www.tru-test.com.
For more information
A comprehensive user manual for the indicator is available for
downloading at www.tru-test.com. This contains information about how
to make the most of your indicator and how to customise the indicator
to meet your specific requirements.
once to type a colon (:) or twice
to type a space.

Deleting data

To delete the last record in the session:
1 Press .
to display Clear Last Record.
2 Press
3 Press .
To delete the oldest session on the indicator:
1 Press .
2 Press , to display Sessions.
3 Press .
to display Clear Oldest Session.
4 Press ,
5 Press .
Note:
ID information remains in the indicator.
To delete all the sessions on the indicator:
1 Press .
to display Sessions.
2 Press ,
3 Press .
repeatedly until Clear ALL Sessions is displayed.
4 Press
5 Press .
Note:
ID information remains in the indicator.
To delete all data on the indicator:
1 Press .
2 Press , to display Sessions.
3 Press .
4 Press repeatedly until Clear all sessions & VID-EID Links
is displayed.
5 Press .
Note:
All data, including ID information is deleted.
Specifications
Total capacity 2000 or 3000 kg (4400 or 6600 lb) depending on load bars used.
Resolution Set to 0.5 kg (fine mode 0.1 kg) or 1 lb (fine mode 0.2 lb).
Accuracy ±1 % or 2 resolutions (whichever is greater) with Tru-Test load bars
connected.
Power supply 5 V DC (power adaptor).
Operating temperature -10 to +40 °C (+14 to +104 °F).
Storage temperature -20 to +35 °C (-4 to +95 °F).
Internal battery run time Up to 20 hours with 2 load bars connected.
Environmental IP67 (immersion in up to 1 m (3') of water).
Animal records Up to 10,000
Sessions Up to 50