Tabla De Contenido; Safety Notes; Correct Use; Transport Inspection - oventrop OV-DMPC Manual De Instrucciones

G
Read installation and operating instructions in their
entirety before using the measuring system
The installation and operating instructions, as well
as other valid documents must remain with the user
of the system
Content:
1. General information........................................... 3
2.

Safety notes .......................................................3

3. Transport, storage and packaging .................... 3
4. Technical data ....................................................4
5. Description ........................................................ 4
6. Initial operation.................................................. 4
7. Maintenance...................................................... 4
8. Warranty ............................................................ 4
Illustr. 1.1 OV-DMPC measuring system consisting of
the "DMPC-sensor" and accessories
For an overview of our global presence visit
www.oventrop.com.
"OV-DMPC"- Measuring system
Installation and operating instructions for the specialised installer
DANGER
ATTENTION
for product, system or environment
NOTE
Useful information and notes
1.4 Copyright
The installation and operating instructions are copy-
righted.
2 Safety notes

2.1 Correct use

Safety in operation is only guaranteed if the system is
used correctly.
The system can be used in central heating and cooling
systems with closed water circuits.
Any use of the measuring system outside the above ap-
plication will be considered as non-compliant and mi-
suse. Claims of any kind against the manufacturer and/or
his authorised representatives due to damages caused
by incorrect use cannot be accepted.
The observance of the installation and operating instruc-
tions is part of the compliance terms.
2.2 Possible danger at the installation location
WARNING
Hot surfaces
The measuring system may get very hot during ope-
ration. Do not touch without safety gloves.
3 Transport, storage and
packaging

3.1 Transport inspection

Upon receipt check delivery for any damages caused
during transit.
Any damage must be reported immediately upon re-
ceipt.
ATTENTION
- Please protect against external forces (e.g. impacts,
vibrations etc.).
- Components of the measuring gauge such as mea-
suring hoses must not be misused for the absorp-
tion of external forces, e.g. as retaining devices
etc.
- Suitable means of transport have to be used.
Subject to technical modification without notice.
106927780
Valves, controls + systems
Imminent danger to life and
limb
Potential dangerous situation
10/2013
3