Abnormal Measurement State; Data Transfer State - Henry Schein Nellcor 900-8273 Instrucciones De Uso

Figure 3-3 Display SpO2 and PR Trend Graph
Trend table:
Figure 3-4 Display SpO2 and PR Trend Table

3.2.3 Abnormal Measurement State

If the SpO sensor does not connect to the oximeter, it will give a
2
medium alarm, and display
If the SpO sensor falls off from the finger, it will give a medium
2
alarm, and display
In menu state or trend state, if there is no operation for 30 seconds,
the oximeter will return to measurement state.
In measurement state, if there is no measurement data and no
operation for 10 minutes, the oximeter will turn off automatically.
In Data transfer state, if the oximeter does not receive any
responsible signals for 10 minutes, it will turn off automatically.

3.2.4 Data Transfer State

Set Data Storage in menu to ON, the measurement value will be
stored in the oximeter. The SpO
transferred from oximeter to Oximeter Viewer Data Management
Software.
Data transfer procedure:

After the measurement and storage are all finished, turn off
the oximeter;
in the information area.
in the information area.
and PR information can be
2
28