Refitting The Door; Adjusting The Height Of The Door - LG GSX961NSAZ Manual Del Propietário

6
Lift the upper hinge fixed between the
appliance and the appliance door and then
remove it.
Upper hinge
Door
7
Remove the freezer and fridge compartment
door by lifting it upward. At this time, the
door should be lifted enough for the steel
pipe to be completely pulled out.
NOTE
• When moving the freezer door, be careful not
to damage the water tubes. The doors should
be laid down on a blanket in a safe area once
they have been removed.
• If the water tube end is damaged, it should
be trimmed to ensure it does not leak when
refitted.
Not straight
Damaged

Refitting the Door

Mount them in the reverse sequence of removal
after the appliance is passed through the access
door.
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may falll out, do not
adjust the height of the appliance door more
than 5 cm.
[Method1]
*Reference
1
Loosen the keeper nut by rotating it
counterclockwise using a 19 mm spanner.
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise with
an 8 mm spanner.
Stretched
Keeper nut
Adjustment hinge pin
Spanner
To loosen the nut
Up
Down
EN
15