Installation (Installation) - Trust 18162 Manual Del Usuario

600VA UPS – User's Manual
Package contents (Package contents)
On/Off button
Green
Status LEDs:
Red
AC output
Circuit breaker
AC input

Installation (Installation)

- Turn off your computer.
-
Connect your computer's AC input cable to the UPS' AC output port (
- Turn on the UPS.
- Charge the UPS for 8 hours.
- The equipment connected to the UPS can be switched on.
Safety & proper usage reminders (Safety & proper usage reminders)
- When connected to mains power, the UPS needs to be On for its battery to charge.
- Do not open or repair this device, and keep it away from liquids.
- If the battery is opened or damaged, the substances released may be flammable and harmful to
skin, eyes.
- Always connect the UPS to an earthed wall socket.
- Do not connect a multiple socket to the UPS.
- The output ports may still be powered, even when the device is turned off.
- Make sure the device is not placed on a heat-sensitive surface and that the UPS has sufficient
ventilation.
Alarm & Indicators operation table
Alarm Condition
Off. AC mode. (normal function)
Sounding every 10 seconds. Battery mode. (backup function)
Sounding every second. Low battery at battery mode.
Continuously sounding. Fault.
Off. Alarm for over-temperature
protection.
).
Indication
Green LED lightning.
Green LED flashing every 10
Seconds.
Green LED flashing every second
And red LED lightning.
Red LED lightning
Red LED flashing every 0.5
seconds.
2