Idiomas disponibles
Idiomas disponibles
4. Using a grease pencil or equivalent, mark the location
of the actuator rods at the control (2).
5. Disconnect the actuator rods from the control.
6. Remove the two nuts (3) that secure the release han
dle (1) and the control (2) to the tailgate.
7. Remove the control and the release handle from the
tailgate.
8. Remove the two retainers (1) holding in the lock cylin
der (2) to the handle (3).
9. Drill two 4 mm (5/32 in.) holes (1) in the lock actuator
arm (2).
Dec 01, 2011
3
K6869568 Rev. 3
