Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
When blending small quantities, always add enough ingredients to ensure that the blender blades
are covered before operating your blender.
•
To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole, then replace the cap.
•
Check that the added ingredients don't increase the volume in the jug past the 1500ml mark.
ERROR SIGNALS
If your blender controls become inoperable for any other reason, please power it off and on again.
Error 1: The control panel flashes in a repeating sequence of three quick flashes then a longer flash. This
indicates that a large air bubble has formed in a mixture that may be too dry. Touch anywhere on the
control panel to dismiss the error and then add liquid and/or switch off, stir the ingredients and restart.
Error 2: The control panel flashes on and off constantly. This indicates that the motor has overheated.
Unplug and let the blender cool down for 20 minutes to reset.
CARE AND MAINTENANCE
1.
When you have finished, tap
2.
Wipe the outside of the motor unit with a clean damp cloth.
3.
Hand wash the removable parts.
Referring to the diagram:
¬ You may wash these parts in the top rack of a dishwasher.
` You may wash these parts in the dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes. The
damage should be cosmetic only, and should not affect the operation of the appliance.
BLADE UNIT
You may wish to remove the blade unit for cleaning.
1.
Remove the lid.
2.
Sit the jug upside down.
3.
Unscrew the collar from the jug and carefully remove the blade unit.
4.
Handle only the plastic – don't touch the metal parts.
5.
Wash the blade unit in warm soapy water, rinse, and air dry.
6.
Replace the blade unit and screw the collar firmly onto the bottom of the jug.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances, appliances
and rechargeable and non-rechargeable batteries marked with one of these symbols
must not be disposed of with unsorted municipal waste. Always dispose of electrical
and electronic products and, where applicable, rechargeable and non-rechargeable
batteries, at an appropriate official recycling/collection point.
C
then unplug the blender.
6
Tabla de contenido
