Russell Hobbs 28241-56 Manual De Instrucciones página 5

PULSE OPERATION
For control over blending consistency, use the pulse/ice crush * icon.
1. Tap C to activate the control panel.
2. Tap the * icon to enter pulse/ice crush mode. The * icon will flash.
3. Tap the * icon again and keep your finger on it. The blender will run at maximum speed for as long
as you keep your finger in contact with the * icon. Release your finger to stop.
ICE CRUSH
Tip: Add a little water to the ice cubes.
1. Place the ice cubes into the jug and fit the lid. Don't add too many ice cubes or you may overload
your blender. Add a little water to help the crushing process.
2. Tap C to activate the control panel.
3. Tap the * icon to enter pulse/ice crush mode. The * icon will flash.
4. Tap the * icon again and keep your finger on it. The blender will run at maximum speed for as long
as you keep your finger in contact with the * icon. Release your finger to stop.
WHEN YOU HAVE FINISHED
C
1. Switch off ( ), and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
USING THE ADAPTIVE BLENDING PROGRAMMES
1. Tap C to activate the control panel.
2. Tap the desired function icon then tap the flashing + icon.
3. Your blender will first sense the level of resistance of the ingredients for about 3 seconds and then
adapt the programme accordingly.
Button Function
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
NOTES
• The Smoothie, Icy drink and Soup programmes will run then stop automatically. The lights on the
slider control act as a guide to show where the programme is in the blending cycle. Once all of the
lights have gone out, the programme will stop.
• The Sensigence blender is programmed to adapt to the level of resistance of the
ingredients within the jug, therefore throughout the blending cycle the speed of the motor
may change, it may stop briefly whilst the programme is still running and blending times
will differ depending on the ingredients inside. These adaptions help achieve optimal
results.
To stop a programme at any time, tap @.
•
• When you have finished, tap
before removing the lid from the jug, or removing the jug from the motor unit.
TIPS
• Generally, large quantities, thick mixes, and a high ratio of solids to liquids require longer timings and
slower speeds.
• Smaller quantities, thinner mixes, and more liquids than solids require shorter timings and higher
speeds and intermittent pulses.
C
then unplug the blender. Always wait till the blades come to a stop
5
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE