CARLO GAVAZZI EM112 Instrucciones De Instalacion Y Uso página 7

Page
Total imported active energy**
l
Requested average power (d = demand) calculated for the set interval. The value remains the same for
l
08
the entire interval. It is = 0 during the first start up interval.
Maximum requested power (dMd = Peak demand) reached since last reset
l
Active energy imported with tariff 1 (t1). Displayed if tariff management is on (Tariff = on).
l
09
Active power
l
Total active energy imported with tariff 2 (t2). Displayed if tariff management is on (Tariff = on).
l
10
Active power
l
NOTE **: If easy connection is on (Measure = A), it indicates total energy without considering the direction.
NOTE***: displays whether imported and exported energy are measured separately (Measure = b).
Measurement faults
If the measured signal exceeds the admitted analyzer limits, a specific message appears:
EEE blinking: the measured value is out of limits
l
EEE on: the measurement depends on a value that is out of limits
l
NOTE: active and reactive energy measurements are displayed but do not change.
8021446 | EM112
Description
©2014 | CARLO GAVAZZI Controls SpA| 7